Pedestrian reach stacker with Combilift's patented multi position tiller arm

The new Combi-CS counterbalance pedestrian stacker combines optimum narrow aisle performance with full visibility of the forks, load and surroundings for enhanced health and safety procedures, not only for the operator but also for other personnel who may be in the vicinity. With tilting mast, the compact design of the Combi-CS enables it to work in the smallest operating aisles for a machine of its type and lift capacity.

A key innovative feature is the patented multi-position tiller arm, with low effort AC power steering and integrated display monitor, which allows the operator to steer the rear wheel from either the right or left side, rather than the rear of the truck which is the case with conventional pedestrian stackers. This position eliminates the risk of operators being trapped or crushed between the back of the machine and racking when handling products.

The tiller can be turned to the left or right, allowing the operator to remain at the side, providing full visibility of the load and forks, while maintaining full steering control, enabling greater awareness of their surroundings which enhances overall safety. Standing to the side of the stacker eliminates the risk of being trapped or crushed while allowing the Combi- CS to operate in very narrow aisles.

Features:

• Power Steering
• AC Motor Technology
• Rear Wheel Drive
• Patented Multi-Position Tiller Arm

The Combi-CS pedestrian counterbalance stacker enables the safe, space saving and efficient handling of products without the need to use a ride-on forklift. This is of particular benefit in areas where personnel are working such as in production areas and also in retail outlets where the general public may be present.

The patented multi-position tiller arm is a key feature for safer operation and narrow aisle performance. The tiller can be turned to the left or right of the unit to position the rear drive wheel, allowing the operator to remain at the side of the machine rather than at the rear.

This position eliminates crush risk for operators and allows full visibility of the load, the forks and the surroundings. With load capacities from 1000kg to 2,000kg this electric walk behind stacker can work in the smallest operating aisles for a machine of its type and lift capacity.