- SOLUTIONS
Data Center Skid Handling Solutions
- +353 47 80500
- Annahagh, Co. Monaghan, H18 VP65, Ireland
- 1 877 2662456
- 303 Concord Street, Greensboro, NC 27406
DATA CENTER SKIDS REQUIRE SAFE, PRECISE HANDLING. COMBILIFT PROVIDES SPECIALIST EQUIPMENT FOR POWER, COOLING, ELECTRICAL AND MODULAR INFRASTRUCTURE.
From transformer and switchgear skids to cooling modules, prefabricated power systems, utility skids and natural gas compression skids, Combilift helps operators move heavy and awkward data center equipment with greater control.
Multidirectional handling makes it easier to transport long or oversized skids through production areas, staging zones and restricted access routes.
Combilift solutions support every stage of the handling process, from component storage and skid assembly to final positioning and site logistics.
Compact dimensions, high capacities and multidirectional manoeuvrability help reduce space requirements while improving the movement of critical data center infrastructure.
BUILT TO HANDLE LOADS THAT KEEP DATA CENTERS MOVING.
From heavy skid-mounted systems to high-value electrical and cooling equipment, Combilift helps operators move critical infrastructure safely, efficiently and with greater control.
Trusted by Backup Power & Data Center Infrastructure Suppliers Worldwide
Combilift combines high-capacity lifting, multidirectional manoeuvrability and narrow aisle performance to handle transformer skids, power modules, cooling systems, switchgear and other oversized data center equipment.
By reducing turning space, improving load stability and supporting precise positioning, our solutions help streamline manufacturing, staging, storage and installation while protecting valuable infrastructure.
From heavy skid-mounted systems to smaller electrical assemblies, Combilift offers handling solutions for a wide range of load sizes, weights and operating environments. This flexibility helps data center manufacturers and contractors improve workflow, reduce unnecessary handling and make better use of available space.
Skid Mounted Equipment
Heavy skid-mounted equipment demands controlled handling, especially where access is restricted and load dimensions are awkward. Combilift multidirectional solutions help move long, wide and high-value skids with greater stability and less manoeuvring space.
Cooling Skids
Cooling and mechanical skids are often large, sensitive and difficult to position using conventional forklifts. Combilift provides the manoeuvrability and load control needed to move chiller, pump and cooling assemblies safely through restricted spaces.
Electrical Skids
Electrical skids and switchgear assemblies often need to be moved through tight spaces without compromising load control. Combilift multidirectional handling equipment allows operators to reposition long or bulky electrical modules with fewer corrective movements.
Modular Power Skids
Power skids, transformer assemblies and switchgear modules require precise handling throughout production, staging and installation. Combilift equipment helps operators move these loads efficiently while maintaining control in confined areas and busy project environments.
Transformer Skids
Transformer skids combine substantial weight with high-value components and demanding positioning requirements. Combilift solutions provide the stability, visibility and manoeuvrability needed to move transformer assemblies safely through production, storage and installation areas.
Prefabricated Skids
Prefabricated skids and modular equipment packages can vary significantly in size, weight and centre of gravity. Combilift provides flexible handling solutions for moving these units efficiently between assembly, test, staging and final installation areas.
Heavy & Oversized Skid Handling
Large equipment skids can be difficult to move safely due to their weight, dimensions and centre of gravity. Combilift solutions provide the capacity, stability and visibility needed to handle oversized skids with greater control across production, staging and site environments.
Skid Positioning & Installation
Final positioning often presents the greatest handling challenge, particularly where access is restricted or clearances are tight. Combilift multidirectional equipment helps operators approach loads from multiple directions, reducing manoeuvring space and improving placement accuracy.
UPS & Battery Skids
UPS systems, battery skids and energy storage modules require careful handling due to their weight, value and sensitive components. Combilift equipment supports the controlled movement of these loads through assembly, storage, staging and installation areas.
Trusted by Backup Power & Data Center Infrastructure Suppliers Worldwide
View our Material Handling Solutions for Data Center Skids
The Combi-SC Straddle Carrier is built for the movement of large, heavy and oversized skid-mounted equipment. With capacity up to 35,000kg, it is well suited to transformer skids, modular power units, cooling systems and prefabricated infrastructure where conventional forklifts or fixed lifting systems may be impractical.
- Capacity: Up to 35,000kg
- 20’, 30’, 40’, 45’ Containers
- 360° Visibility
Watch Video or view range…
The Combi-CB and electric Combi-CBE provide compact multidirectional handling for long, bulky skids. Sideways travel makes them ideal for moving electrical skids, switchgear and power modules through restricted areas.
- Capacity: 5,000lbs - 15,500lbs
- Lift Height: Up to 7.5m
- Engine Types: Diesel, LPG & Electric
- Machinery Type: Multi Directional
Watch Video or view range…
The COMBI C-Series is designed for long, heavy and high-value skid-mounted equipment. Its multidirectional capability makes it ideal for moving transformer skids, modular power systems, switchgear and cooling skids through restricted production and installation areas.
- Capacity: 5,000lbs - 55,000lbs
- Engine Types: Diesel, LPG & Electric
- Machinery Type: Multi Directional
Watch Video or view range…
Aisle Master articulated forklifts support the storage and movement of components used in skid assembly, electrical systems and modular infrastructure. Their narrow aisle capability helps maximise warehouse capacity while allowing a single truck to operate across indoor storage, production and external loading areas.
- Capacity: 3,300lbs - 6,000lbs
- Engine Type: Electric or LPG
- Lift Height: Up to 15m
- Machinery Type: Articulated VNA Forklif
Watch Video or view range…
The Combi-WR4 offers precise pedestrian handling for smaller electrical assemblies, control equipment, UPS components and other high-value parts used within skid-mounted systems. Its compact footprint and reach capability make it particularly useful in narrow production, assembly and storage environments.
- Capacity: 3,200lbs
- Overall Width: 1512mm
- Engine Type Available: Electric
- Platform Length: 530mm
Watch Video or view range…
testimonials
DATE CENTER SKID
ESSENTIALS
Skid Types
Combilift material handling equipment is suited to a wide range of skid mounted equipment used throughout data center manufacturing, construction and installation. Typical applications include transformer skids, switchgear skids, modular power skids, cooling skids, chiller skids, UPS skids, battery skids, mechanical skids, pump skids and prefabricated equipment skids. These loads can vary significantly in size, weight and centre of gravity, so handling requirements often differ from one system to another.
For larger and heavier data center skids, the Combi-SC and COMBI C-Series provide the capacity and manoeuvrability needed to move substantial modular systems safely. The Combi-CB and Combi-CBE are well suited to smaller electrical skids, equipment frames and power modules where space is restricted.
This allows Combilift to support a broad range of data center skid handling applications, from component movement and assembly through to staging, loading and final positioning.
Skid Weights
Data center skids can range from relatively compact electrical assemblies to large modular systems weighing many tonnes. Smaller skid mounted equipment may fall below 2,500kg, while medium and heavy systems can range from 2,500kg to 25,000kg or more. Large prefabricated modules and containerised infrastructure can reach weights of up to 35,000kg.
Combilift offers handling solutions across this range. The Combi-WR4 is suited to smaller assemblies, while the Combi-CB and Combi-CBE cover medium-capacity applications. The COMBI C-Series extends into much heavier load classes, and the Combi-SC provides a high-capacity option for large modular or containerised systems.
Weight alone does not determine the correct machine. Skid length, width, centre of gravity, fork position, ground clearance and available manoeuvring space must also be considered when selecting suitable skid handling equipment.
Equipment Selection
Selecting the right skid handling equipment depends on both the load and the environment in which it needs to operate. Skid weight, length, width, centre of gravity, access routes, floor conditions and final positioning requirements all influence machine choice. The best solution should provide sufficient capacity while also allowing the operator to move and position the load safely within the available space.
The Combi-SC is suited to very large modular skids and containerised infrastructure. The COMBI C-Series is ideal for long and heavy transformer skids, cooling skids, power modules and switchgear assemblies. The Combi-CB and Combi-CBE provide compact multidirectional handling for electrical skids and smaller power systems where turning space is restricted.
For warehouse and component handling, Aisle Master supports narrow aisle storage, while the Combi-WR4 is suited to smaller electrical assemblies and precision handling tasks.
Handling Challenges
Heavy skid mounted equipment can be difficult to move because of restricted access, awkward dimensions, high centres of gravity and limited turning space. Many data center skids also contain sensitive and high-value electrical, power or cooling components, making load stability and controlled movement particularly important.
Conventional forklifts may require significant space to turn when carrying long or wide loads. Combilift multidirectional forklifts allow operators to travel sideways with the load, helping reduce the space required to manoeuvre through production areas, staging zones and restricted access routes.
For larger loads, the Combi-SC provides high-capacity handling for oversized modular systems, while the COMBI C-Series offers controlled movement for long and heavy equipment. By matching the machine to the load profile, operators can reduce unnecessary repositioning, improve visibility and maintain greater control during skid transport and positioning.
Project Stages
Skid handling requirements can change considerably throughout the lifecycle of a data center project. During fabrication and assembly, steel frames, electrical systems, cooling equipment and other components may need to move repeatedly between workstations, testing areas and storage zones. Once completed, the finished skid must then be staged, loaded and prepared for delivery.
Combilift equipment can support skid movement through fabrication, assembly, testing, storage, staging, loading, unloading and site logistics. Aisle Master and the Combi-WR4 can support component storage and internal movement, while the Combi-CB, Combi-CBE and COMBI C-Series can move completed equipment skids through production and assembly environments.
For large modules and heavy prefabricated systems, the Combi-SC can support external yard movement and site handling before the equipment reaches its final installation position.
Indoor & Outdoor
Data center skid handling often involves a combination of indoor manufacturing areas, warehouses, external staging yards and project sites. Each environment presents different requirements in terms of space, capacity, emissions, ground conditions and manoeuvrability.
Indoor applications may require compact dimensions, electric power and precise control, particularly when moving electrical skids, switchgear, UPS systems or smaller power modules through restricted production areas. The electric Combi-CBE, electric COMBI C-Series options, Aisle Master and Combi-WR4 are well suited to these environments.
Outdoor handling can involve larger transformer skids, modular power systems, cooling equipment and prefabricated infrastructure. The COMBI C-Series and Combi-SC provide the capacity and flexibility required for heavier loads in external yards, staging areas and project sites, helping support movement from manufacturing through to installation.
Load Dimensions
Skid weight is only one part of the handling requirement. Load length, width, height, centre of gravity, fork spacing, ground clearance and available turning space can all affect which machine is suitable. A relatively light skid may still require specialist handling if it is particularly long, wide or difficult to approach.
Multidirectional models such as the Combi-CB, Combi-CBE and COMBI C-Series are particularly effective for long or wide skid mounted equipment because they can travel sideways while maintaining control of the load. This can reduce the turning area required and make it easier to move equipment through narrow production routes or restricted installation zones.
Larger structural frames, transformer skids and modular power systems may require the higher capacity of the C-Series or Combi-SC. Assessing the complete load profile helps ensure the selected equipment provides the required stability, clearance and positioning accuracy.
ready to enquire?
COMBILIFT PROVIDE TAILORED SOLUTIONS FOR EVERY INDUSTRY
Contact us now to optimise your fleet with Combilift’s customisable Solutions!
frequently asked questions
Find answers to the most common questions below about our Combilift Ranges, suitable for Data Centers.
If you need additional information, please get in touch.
The right equipment depends on the skid’s weight, dimensions, centre of gravity and operating environment. Combilift offers multidirectional forklifts, straddle carriers, articulated forklifts and pedestrian handling equipment for skid-mounted loads ranging from smaller assemblies to heavy modular systems.
Yes. Combilift equipment is suitable for handling transformer skids, modular power skids, switchgear systems and other heavy electrical infrastructure, with capacities available up to 35,000kg.
For very large or heavy skids, the Combi-SC Straddle Carrier and COMBI C-Series provide high-capacity handling with excellent manoeuvrability and load control.
Yes. Combilift multidirectional forklifts can travel sideways, helping operators move long or bulky skids through restricted access routes with less turning space than a conventional forklift.
Yes. Cooling skids, chiller skids, pump skids and other mechanical assemblies can be handled using Combilift equipment selected according to the load size, weight and site conditions.
Electric Combi-CBE models, electric C-Series options, Aisle Master forklifts and the Combi-WR4 are well suited to indoor manufacturing, assembly and storage environments.
Yes. Multidirectional movement and compact manoeuvrability make Combilift equipment suitable for controlled positioning of skid-mounted systems in restricted production and installation areas.
Depending on the model, Combilift equipment can handle loads from approximately 3,200lbs up to 35,000kg, covering everything from smaller electrical assemblies to heavy prefabricated modules.
Typical applications include transformer skids, electrical skids, switchgear skids, modular power skids, cooling skids, chiller skids, UPS and battery skids, mechanical skids and prefabricated equipment modules.
In many applications, yes. Combilift’s multidirectional forklifts are designed to handle long, heavy and awkward loads while reducing the space required to manoeuvre them.
