CONCRETE IS NO PROBLEM WITH COMBILIFT
Precast Concrete Industry
The Cost Effective Solution for handling Precast Concrete
The rotating capabilities of this bespoke Combi-SC are much safer than using a crane or any alternative method.
Combi-MG Mobile Gantry
The main use for the truck was for lowering these concrete sections into a deep trench, so to have a long enough lift stroke, we opted to use a hydraulic winch mounted to the top of the truck, giving the ability to lower the hook 7 meters!
The Combi-SBT is powered by a state-of-the-art diesel engine that is in line with all current emission regulations. It has a 3-wheel design, with the rear wheels hydrostatically driven. The machine is steered from the front, ensuring excellent manoeuvrability and with the operators cabin also situated at the front, it enables even novice operators to position the machine exactly where it needs to be.
How it works
The Combi-SBT consists of a cab which steers the load bed behind it underneath the deck of the swap body. Platforms at either end of the load bed are raised to lift the swap body off the ground – in just 11 seconds – so that it can easily be transported and deposited elsewhere in the yard or the facility.
Improve Productivity and Storage
Site Storage capacity can be considerably improved because of the Combi-SC’s ability to work in narrow aisles and utilise 1 over 1 storage.
Grapple Arms - An effective solution for handling Precast Concrete
Remote control option
This fully remote control truck allows the driver to visually monitor all areas of the machine while navigating those narrow aisle-ways, and with a full side-shift, the load can be placed with pin point accuracy.
The Combi-SC is the Perfect Solution for Lifting Concrete Pipes
Tailored specifically to suit our Customer's needs
With an impressive 40 ton lifting capacity, this MG can be used in various different applications.
This customer needed a truck with a single lifting hook which could rotate with 40 ton hanging from it. To be able to pick specific loads, the side shift was included to allow the hook to move from left to right while the machine is stationary.